Why El Paso Body Shops Recommend Tubeless Tires

Advantages And Disadvantages Of Tubeless-Ready Tires

Why Texas Auto Collision of El Paso recommends tubeless over anything else, will surprise you. Besides cost, there are many different reasons why riding tubeless could significantly save you time and money.

One of the most outstanding advances in the mountain bike sector was the arrival of the tubeless-ready (TR) tires. This system is based on mounting the tires directly on the rim without using an inner tube. An advance called to last where the tire and tire form a perfect combination. This has been accomplished by improving the tires and tires to create a watertight cavity that prevents unwanted air loss. But what are the advantages and disadvantages of Tubeless Ready tires? The purpose of this article is to publicize the pros and cons of such a system.

Tubeless Ready Advantages

Low Tire Pressure
When riding without tubes, we have more range with tire pressures and can roll with lower tire pressures without fear of pinching the tube. Driving with low pressures allows us better to adapt the tires to the irregularities of the terrain and provide us with more comfortable and safe driving. Thanks to this lower pressure, we will obtain some associated benefits:

Lower Rolling Resistance

The interaction between the roof and the ground is what causes the rolling resistance. In not a few outings with our mountain bike, we move through uneven, rugged terrain, with roots and stones. The almost continuous hitting with these irregularities will cause continuous jumps of the wheels. The use of lower pressure in the tire will allow it to adapt to the irregularities of the terrain, acting as a shock absorber and allowing us to pass obstacles more quickly.

Increased Puncture Safety

When mounting a Tubeless-Ready tire on our bike, we are forced to use sealing fluid with which most punctures will seal almost instantaneously, so we are probably not aware of puncturing. As we do not have a tube, we will not have to worry about the dreaded pinches produced when hitting an obstacle with the tire hard enough to compress the tire so that the tube would be trapped between the obstacle and the rim causing a cut in the tube and the consequent loss of air. This is true on your vehicle as well, which can prevent headaches in the long run.

Disadvantages of Tubeless Ready

Assembly Difficulty

Being a system that requires an airtight seal and taking into account that Tubeless Ready tires are light, but at the same time, they are more porous, we are obliged to use a sealing liquid that allows us to cover any air loss. Getting the tire bead on the rim is no easy feat; you may even need a portable air compressor to get a proper seal.


Like any system, the Tubeless Ready needs maintenance. In seasons of the year, such as summer, the sealing liquid can dry out, so it will be necessary to add new liquid to ensure that the sealant will always work one hundred percent. It will be as easy as removing the valve core, adding the liquid, and re-inflating to carry out this task. This process should be repeated every 6-8 weeks, depending on weather conditions. The sealing fluid has a double function, on the one hand, to prevent and repair possible punctures and to guarantee the tightness of the system by sealing the joints between the rim and tire.

We Can Still Click

Although punctures are unlikely since these normally are automatically sealed with the puncture-resistant liquid, sometimes, either because it is a cut or a puncture of such a size that the liquid is impossible to plug, we will be forced Make use of a tubeless repair kit with a wick or putting a camera on. Unfortunately, we cannot completely get rid of carrying spare parts.